Saudi Arabia Hospital Projects
ITEM
Saudi Arabia Hospital Ceiling Project
FEATURED PRODUCTS
Ceiling system / Interior wall system
Aluminum window / Curtain wall system
LOCATION
Saudi Arabia
TOTAL AREA
15000 sqm
TIME
2009
One-stop solution for building material to the customers
Please contact us to discuss your requirements.
–
PRANCE service step for building material & project
1. According to the drawing and BOQ from customer, and the communication between PRANCE’s representatives and clients.We will know the project basic information and the products requests.
2. After PRANCE’s technical team study & analyze the plan drawings and BOQ from customer,we list out to our clients what we can supply, show initial design and offer production quotation.
3. We will make adjustment with our clients suggestions after he/she checked our design plan.
Then we will offer a final design and products application sketches. With the customer’s approval of this order we start the production.
▼ Mineral Finer Ceiling system
Ⅰ. Installation method
Conventional combination
1. Mineral fiber ceiling
2. L angle
3. Clip
4. Hanger of 38 main channel
5. Main tee
6. Cross tee
7.Expansion screw with half hook
Deep combined installation
1. Main channel
2. Clip
3. Omega channel
4. Hanger of main channel
5. Spring clip
6. L angle
7. Hanging bolt
Ⅱ.Installation effect display
Welcome to send an email to us for more details , we are keen to wait for your consultation.
▼ Wall System
Ⅰ. Installation method
Gypsum board drywall
1.Screw
2.Track
3.Stud
4.Cut through
5.Gypsum board
6.Skirting
7.Track
Detailed number of accessories，
Ask at the bottom of the page.
Specific steps are as follows:
① Draw the installation guideline.
② Use the shooting nail or expansion bolt to fix keel on the ceiling and floor.
③ And arrange the vertical keel as per the request and install the horizontal keel.Fixing method of the board.
④ To cut the board as per the required size.
⑤ The boards should be fixed on the keels by the tapping screws in seam.misplacement form,the distance between tapping screws is 250mm. And each screw head should enter 0.5m depth into the board.
⑥ Please leave a seam between boards about 2mm width.
⑦ When fixing the board,it should be mounted from its center to the edges.Don’t fix it at different points at the same time avoid the over bending of the board.
Ⅱ.Installation effect display
The partition of this project is using PRANCE Aluminum-alloy & glass high partition and Gypsum board partition.
Welcome to send an email to us for more details , we are keen to wait for your consultation.
▼ Aluminum frame glass window
1.Size: 50 Series
2.Thickness : 1.4 mm
3.Glass type: Double glazing unit
4.Glass size: (LOW-E)+9A+5mm
▼ Wall System
Ⅰ. Type description
| |
|
|
Aluminium curtain wall 1.Aluminum panel 2.Thickness : 3mm 3.Dry-handing aluminum curtain wall |
Glass curtain wall 1. Aluminum profile : 70×140 2. Thickness : 3mm 3. Hidden framing glass curtain wall 4. Glass type:6(LOW-E)+12A+6mm,heat reflecting coated |
Please slip to the right to see the full table.
Ⅱ.Installation effect display
Welcome to send an email to us for more details , we are keen to wait for your consultation.
